Assembly and Other Info

StrataPad

StrataPad Assembly Instructions

StrataPad Firmware Flashing Instructions

SouthPad / NormiePad

SouthPad/NormiePad Firmware Flashing
  1. Remove the 4 screws from the back of the case
  2. Ensure the USB cable is plugged in
  3. Press the BOOT and RESET buttons on the back at the same time and hold for 1-2 seconds, then release
  4. A window should pop up on your computer to drag-and-drop the .UF2 firmware file into
  5. The window show disappear after it transfers and your numpad should restart
  6. Done!